March 2025

Director's Welcome
BTC Students and Families,
March 21st marked the end of quarter three, and we’re headed toward the end of the school year with just ten weeks left to pack in a lot more learning. For our seniors, it’s the final quarter of their high school careers!
In an effort to better understand our students’ and families’ experiences at BTC, this newsletter contains links to our district’s annual survey. By providing feedback on your experience, we can work to preserve the strongest parts of BTC, and plan improvements in areas of growth. These details also help us build comprehensive reports for sending schools, who make career and technical education pathways possible for students, navigating complex scheduling and tuition. We want to be sure your districts are informed about where their resources are going, and understand the impact of our programs.. Last year’s survey results were quite positive, and we want to be sure we’re monitoring year-to-year to continue serving students and families well. As the instructions indicate below, it is important that you fill out the survey based only on your experience with BTC.
Thank you for taking the time to complete this survey, and for your continued support of our programs. Here's to a great fourth quarter!
-Jason Reed
Burlington School District Annual Survey
Please take a moment to complete the Family Annual Survey or Student Survey. Burlington School District values your feedback and perspective on you and your child’s experience in our district and at our technical center. If you need language support to access the survey, we can connect you with a multilingual liaison to assist you in the process. Responses are used to measure our progress on our Strategic Plan, inform professional development and training, and to identify bright spots and areas of need. To be sure our data is specific to each school, it is important that you fill out the survey based ONLY on your student's experience at the Burlington Technical Center. Please do not include information about their home high school. In addition to this information informing our work in the Burlington district and at BTC, it also provides us with information to send to your student’s high school so they can be informed about their students’ experiences with BTC as well.
Thank you for taking the time to complete this survey!
Counselor's Corner
Student Support Services
As we begin the 4th quarter, grades will be sent home soon. The final quarter is a busy time, and if you or your child are feeling overwhelmed or need help staying organized, please don’t hesitate to reach out.
WorkKeys assessments are still underway and will conclude by May 16th. Additionally, returning student forms for 1st-year students are due by April 17th. These forms indicate whether students plan to return next year, so please remind your child to submit them if they haven’t done so already.
Thank you for your continued support!
Multilingual Support
At BTC, we're fortunate to have three dedicated English Language (EL) teachers as part of our student support team. But who are these educators, and what exactly do they do? EL refers to English Language learners, and our EL teachers work closely with multilingual students to make language learning more accessible across various programs.
Meet our team: Dan Capps, Emily Kayoi, and Yvonne Sonoda. Each teacher supports a unique set of programs. Dan works with students in Auto and IHC; Yvonne supports Aviation, DEF, and Auto; while Emily is involved with ETL, DI, and DML.
So, what does their day-to-day work look like? EL teachers might spend the day in multiple classrooms, collaborating with content-area teachers to tailor materials, develop vocabulary-building activities, and find culturally relevant resources to support students. Their role is essential in ensuring that multilingual learners receive the resources and support they need to thrive.
Middle School Career Pathways Workshops Begin
Throughout the month of March, BTC’s Career Pathways Coordinator Stacy Clark had the pleasure of visiting middle schools in the CVU school district for some career exploration, and all of the opportunities in tech. From presentations to exploratory workshops, students learned about different career fields, Pre-Tech opportunities, and even got a taste of tech ed with some hands-on activities.
Getting to connect with middle school students is a blast, and we’re looking forward to more workshops this spring with middle schools from the rest of our sending school districts. To learn more, email Stacy at sclark@bsdvt.org.
News and Information
Show Your BTC Pride with Official Gear!
Burlington Technical Center now has an online store where you can grab official BTC apparel and accessories! From hoodies and T-shirts to hats and more, you can rep your program and show off your school spirit in style.
Check out the full selection and place your order today: BTC Online Store.
Upcoming Blood Draw Days – Volunteers Needed
Burlington Technical Center’s Phlebotomy students are seeking volunteers for supervised venipunctures (blood draws). Your participation supports student learning—and comes with bagels and pizza as a thank you. All procedures are supervised by a certified phlebotomist.
Special Saturday Draw Day – April 5
Location: 4095 Williston Road, South Burlington
Time: 11:00 AM – 2:00 PM
Sign up here: Sign Up Link
Additional Blood Draw Dates at BTC (110 Cherry Street):
- March 28 (Friday), 12:20 – 2:00 PM
- April 4 (Friday), 12:20 – 2:00 PM
- April 14 (Monday), 12:20 – 2:00 PM
- April 30 (Wednesday), 12:20 – 2:00 PM
- May 2 (Friday), 5:00 – 7:00 PM
- May 14 (Wednesday), 5:00 – 7:00 PM
For questions, please contact Monica Beard-Raymond at mbeardra@bsdvt.org.
Explore 3D Tech at VTSU This Summer!
Vermont State University is hosting a 3D Technology Institute this summer at their Randolph campus, This is a unique residential program featuring three two-week sessions focused on cutting-edge 3D technologies. Designed to be cross-disciplinary, the sessions are led by VTSU faculty and open to high school students ready to dive into hands-on learning.
Students can earn college credit for each session they complete, and Vermont students attend at no cost—tuition, housing, and meals are fully covered with no need for vouchers or additional funding.
They are especially excited to welcome more students interested in design and illustration, to complement the strong group of engineering applicants already enrolled. Whether you're an artist, engineer, or somewhere in between, this program is built for you.
Spots are limited—apply now to be part of this dynamic summer experience! Click the button below for more information.
Big News from VTSU: Free Tuition for Qualified Vermont Residents!
We're excited to remind you of an incredible opportunity for Vermont students: eligible Vermont residents can attend VTSU tuition-free starting Fall 2025 or Spring 2026!
This Free Tuition Guarantee is part of VTSU's mission to make high-quality education more accessible and affordable for Vermonters across the state. After all federal, state, institutional, and employer aid is applied, VTSU will cover the remaining standard tuition.
Who qualifies?
-
Vermont residents of any age enrolling as new students in degree programs
-
Students pursuing their first undergraduate degree
-
Family income of $50,000 or less (based on FAFSA)
To apply, students must:
-
Apply and be admitted to a standard tuition program at VTSU
-
Submit the FAFSA (School Code: 003698)
-
Complete the Vermont Grant Application through VSAC
Additional requirements include:
-
Enrolling in at least 12 credits each fall and spring semester
-
Maintaining a 2.0 GPA and satisfactory academic progress
Note: This guarantee applies to standard tuition only. Certain high-cost programs (e.g. Engineering & Technology, Nursing, Dental Hygiene) are not included.
Have questions? VTSU is here to help and looks forward to supporting more Vermont scholars on their college journey!
Program Updates
Adult & Continuing Ed
Students also took a field trip to the airport in Middlebury to visit Green Mountain Avionics and J&M Aircraft. While there, they toured the aircraft parking areas to look at the selection of planes based at the field.
They also had the opportunity to reinstall the wings back on a Cessna 172 owned by Vermont Flight Academy. This has been a long-term project for VFA that last years A&P students disassembled so VFA maintenance staff could repair the firewall and nose landing gear. Hopefully it will get back together and flying soon!
Automotive Science & Technology
Afternoon Automotive Science & Technology students finished assembling a manual transmission while morning students wrapped up their engine building and diagnosis unit.
Aviation and Aerospace
The Junior Aviation class tested the hardness of some aviation grade bolts and then performed a heat treatment to those bolts by heating them to 1500 degrees and then quenching them in oil. The students then re-tested the hardness of the bolts to see how it changed. They followed this up with some destructive tests of those same bolts. Students also learned about several inspection techniques including Dye Penetrant, Magnetic Particle, and how to use a borescope.
The Senior Aviation class finished their aircraft batteries unit and started on AC electricity. So far they have constructed and calculated circuits using Inductors, Capacitors and Resistors.
Design, Engineering, & Fabrication
This project involves reading and understanding technical drawings including, orthographics, exploded isometrics, section views, and two-point perspectives. Additionally, students used a variety of machine and hand tools to construct the libraries. Because a careful, efficient cut plan was developed, we were able to construct 4 additional libraries from the materials, 3 of which are being put up for sale as a class fundraiser. These hand made libraries are ready for finishing - paint, roofing, etc...and can be purchased for $275. Please contact instructor Dan Treinis at dtreinis@bsdvt.org for details. Act now, supplies are limited!
Students in the afternoon Design, Engineering, and Fabrication class have been preparing work to be CNC plasma cut in partnership with the Generator Maker Space in Burlington. Starting with AutoCAD, students drew a detailed profile drawing of the product, using a blueprint as a guide. Next, students exported the file into another piece of software where they applied their design and creativity skills to customize the part by adding images to cut into or out of the 16 gauge sheet steel.
Design and Illustration & Digital Media Lab
Education Training & Leadership
On March 20th, the BTC rising educators took an exciting field trip to the ECHO Leahy Center for Lake Champlain in Burlington. This visit was more than just an opportunity to explore Vermont’s natural history—it was a hands-on lesson in how community organizations can enhance classroom learning.
Throughout the morning, students engaged in interactive exhibits, met with ECHO educators, and participated in discussions about integrating environmental education into lesson plans. They explored ways to use community partnerships to create engaging and meaningful experiences for young learners, aligning with their goals as future educators.
The experience at ECHO reinforced the importance of utilizing local resources to enrich education. By working with organizations like ECHO, future teachers can provide students with experiential learning opportunities that foster curiosity, critical thinking, and a deeper connection to the world around them.
Health Sciences Academy
Forty HSA students attended the HOSA Future Health Professionals conference and competitions with health sciences students from across the state at the University of Vermont. Students attended workshops, networked with colleges and medical professionals and some were even hypnotized! HSA had 13 students competing in state-wide health competitions and all 13 students won in the top 3 for the state in their competitions! These winners are eligible to participate in the international competition in Nashville this June. HSA Members Lily McArthur and Dieuna Beynnon were also announced as the incoming Vermont HOSA State Officers at the event and will replace outgoing HSA graduating students Brianne Gallas and Abby Fitzpatrick.
List of winners:
Gold Winners:
Myla Arnzen and Lily McArthur: Health Career Poster
Gina Kim: Behavioral Health Test
Alissa Kenwood: Medical Terminology
Isabelle Fouche: Pathophysiology
Silver Winners:
Riley Tierney: Medical Terminology
Whitney Ross: Pathophysiology
Brianne Gallas: Prepared Speaking
Bronze Winners:
Sophie Avery and Hannah Shephardson: Health Career Poster
Leigh Brown: Medical Terminology
Isabelle Boddie: Pathophysiology
Dieuna Beynnon: Prepared Speaking
Homeland Security/Criminal Justice
This quarter, Year 1 students are diving into the fascinating world of the criminal justice system! Before delving deeper, they are exploring the history and development of criminal law. They’re also learning what defines a crime and what factors drive people to commit them.
To kick things off, they examined early theories of crime, including the work of Giambattista della Porta, considered the first criminologist. He had some intriguing ideas about how human behavior might be influenced by our resemblance to animals!
Meanwhile, Year 2 students are embarking on an exciting journey into the criminal mind through forensic psychology. They are focusing on the key elements involved in developing a criminal profile. To top it all off, we had the privilege of hosting Dr. Victoria A. Marini Bowley from VT Forensics! She shared her expertise in forensic and criminal psychology, offering incredible insights into this captivating field.
Introduction to Healthcare
On March 14, 27 Intro to Health Care (IHC) students attended the HOSA Spring Leadership Conference, where they demonstrated their skills and knowledge in a variety of competitive events. Of the 13 students who participated in competitions, 5 placed in the top 3 for the state of Vermont and will proudly represent BTC and Vermont at the International Leadership Conference in Nashville this June.
Top-placing students include:
-
Vera Ludwig and Danika Giri – Silver Medal, Health Career Display
-
Lily Provost – Bronze Medal, Medical Math
-
Tobey Bernabe – Silver Medal, Medical Math
-
Jonathan Slater – Silver Medal, Nursing Assisting
Congratulations to all participants for their hard work and achievements!
Pre-Tech
Pre-Tech students are currently working on drafting blueprints. Once their plans are complete, they will build a balsa wood cabin to accurately demonstrate how stick-built structures are framed. To finish the project, they will 3D print interior stairs to showcase their understanding of stringer construction.
Important Dates and Events
Tuesday, April 1
- SkillsUSA Aviation Written Test
Wednesday, April 2
- Make Music Club (Edmunds Middle School)
Thursday, April 3
- IHC Clinicals Orientation
Friday, April 4
- Devon McGarry from Husky to Guest Speak at DEF
- Alex Linde, PT from UVMMC to Guest Speak at IHC
- HSA Phlebotomy Draw Day (Cherry St.)
Saturday, April 5
- HSA Phlebotomy Draw Day (Williston Rd.)
Monday, April 7
- Self-Defense with Dan Ornum, Deputy Sheriff/Security on Site LLC
Tuesday, April 8
- Skills USA Aviation Competition
- Skills USA Vermont State Conference
Wednesday, April 9
- DEF at SkillsUSA in Randolph
- Make Music Club (Edmunds Middle School
- IHC's UVMMC Clinicals Orientation
- Skills USA Vermont State Conference
Thursday, April 10
- CPR/AED First Aid
Friday, April 11
- SkillsUSA VT Awards DoubleTree By Hilton, So Burlington
Monday, April 14
- Phlebotomy Draw Day (HSA In-class)
- Chittenden Co Sheriff's Dept. to IHC for Fingerprinting
- Self-Defense with Dan Ornum, Deputy Sheriff/Security on Site LLC
Tuesday, April 15
- HSA Careers in Cancer Conference at Larner College of Medicine
Wednesday, April 16
- Make Music Club (Edmunds Middle School)
Friday, April 18
- DEF to Tour OnLogic
April 21-25
- No School, Spring Break
Monday, April 28
- Self-Defense with Dan Ornum, Deputy Sheriff/Security on Site LLC
Wednesday, April 30
- Phlebotomy Draw Day (HSA In Class)
- Make Music Club (Edmunds Middle School)
Friday, May 2
- Phlebotomy Draw Day at Cherry St.