April 2026
Director's Welcome
Fourth Quarter and the End-of-the Year
BTC Students and Families,
It's difficult to believe that we've entered the fourth quarter of the year. The senioritis meter seems to be creeping up a bit, but we're still moving along well and students are engaged. Although we're still in the earliest part of spring, I want to give you some information about the end of the year at BTC considering you're all juggling logistics at two different schools.
For our seniors, and our juniors in our Introduction to Health Care program (one year program), we will be having Recognition Night on Tuesday, June 9th at the Ira Allen Chapel on the campus of the University of Vermont. This our "graduation" celebration, and we invite all family and friends who want to attend. We do not require tickets. I will send out more announcements about it as we get closer, and you'll receive an invitation in the mail as well.
I don't dare tell you a definative last day just yet, for fear of bringing on a massive April snow storm, but what I can tell you is, seniors' last day at BTC will be Monday, June 8th. Juniors will be contining with classes that week.
Part of being a half-day technical center is encouraging our students to stay deeply connected with their home high schools' communities. We understand that schools will be having celebration days and other school events as we get closer to the end of the year. Our partner schools are good about communicating these events to us, and we will excuse students' attendance when they are remaining at their high school on these special days. Some of our partner schools also hold modified classes and programs in the last weeks of the year. They work hard to accomodate BTC students' schedules, and we work with them to iron our attendance priorities.
As a reminder, if you can make time to complete our Burlington School District annual survey, that will be grealy appreciated.
Thank you,
J Reed
The sign goes up on the tech center wing of the new Burlington High School/Burlington Technical Center opening fall of 2026!
Administrative and Support Staff
Counselor's Corner
Student Support Services
Applications have been gone through and teachers are wrapping up interviews. Decisions for acceptance, waitlist and denials will be released shortly in both electronic and mail forms. Prospective students should reach out if they don't receive either.
Career Pathways
Stacy is currently on leave. We look forward to her return at the end of the month. Any questions about college or career pathways can be directed to Mr. Yepez or Ms. Bundy.
Registrar's Desk
Quarter 3 ended on March 27th! Sending schools will be receiving their students’ BTC grades in the beginning of April. If you or your student have any questions or concerns about their grades, I always encourage you to first reach out to their program instructor. You may also reach me either by email at clamothe@bsdvt.org or by phone at (802) 864-8426 ext. 12002 - I am happy to help however I can!
Multilingual & Academic Support Team
Teachers on the Multilingual and Academic support team have been working to interview students for our new student spotlight feature. As always, if you or your student needs support or help from the team, please feel encouraged to reach out.
Student Spotlight
My name is Qusay. I am a student at BTC. I am studying Design, Engineering and Fabrication, and I will be an engineer in the future.
What is your favorite thing about attending BTC?
Making the design, and then making the item in real time from our design. It is super cool to see your design in front of you and be proud of yourself because it's your design and you made it.
Can you share a project or activity here that you especially enjoyed?
The laser box. That was very hard to design, but I enjoyed designing it a lot, and I spent a lot of time making it look good and making it work to use on my desk. When I sit at my desk, I see the box all the time and I am happy with what I made because all the thought and details I put into it are right there in front of me.
What have you found most challenging, and what has been most helpful to you through the challenges?
I think the most challenging aspect is making my designs different from any other person's design. That motivates me to work harder to design better and more creatively, to produce a unique design.
How has career and technology education helped you learn skills for the future?
It has helped me design, sketch, and take measurements of anything I see. It makes me see everything, everywhere in 3D. It got me interested in all kinds of things made by humans. Even if something is hard to make, you can make it just by applying yourself to the task and taking a little bit of time to measure and try something before you make the final product.
What would you tell another student who was thinking about applying to this program?
Before I came to BTC, I thought that it would take a very short time to learn something, but when you come and start studying, you will learn more than at any other school you will probably go to because they go into it more deeply. You can see what you want to do in the future with college and your career. You will learn something that you can't learn anywhere else.
What else can you share about your experience at BTC?
I became more interested in becoming an engineer because I like what I am doing now, and in the future I will enjoy what I have to do. I am very excited to go into engineering after seeing what I am learning right now and what I will learn in the future.
News and Information
Show Your BTC Pride with Official Gear!
Burlington Technical Center now has an online store where you can grab official BTC apparel and accessories! From hoodies and T-shirts to hats and more, you can rep your program and show off your school spirit in style.
Check out the full selection and place your order today: BTC Online Store.
ETL Food Fairies
Please consider supporting ETL's service learning project, ETL Food Fairies!
"Hi there! We, the ETL Food Fairies, are raising money to fund making food baskets for families dealing with food insecurity in Burlington. Our goal is to make breaks from school, when food isn’t provided, easier for families. We want to fill our baskets with nutritious, non-perishable, and shelf-stable foods. ETL Food Fairies is run by two high school students working to improve food insecurity in our community through this project. We deeply appreciate the support and every dollar counts!"
BETA Technologies Job Shadow Program
The BETA Technologies Job Shadow Program is back for 2026, offering high school students a unique opportunity to explore careers in aviation and advanced manufacturing. Applications opened Monday, March 30 on BETA’s careers page. Be sure to check out the program flyer for details on eligibility, program highlights, and application deadlines.
Program Updates
Adult & Continuing Ed
Students are in the turbine engine overhaul unit where they remove and reinstall, take apart and run turbine engines. This group has some of their engine parts laid out and are preparing to remove the hot section of an engine.
Automotive Science & Technology
Automotive Science & Technology students enter the 4th quarter with new units for both classes. First year students are beginning Steering, Suspension and Wheel Alignments.
Second year students are starting a mini unit on welding. Students learn the basics of using an oxy/acetylene torch and MIG welder while practicing hands -on welding skills.
Aviation and Aerospace
In March the Junior Aviation & Aerospace Technology class wrapped up their unit on aircraft material and non-destructive inspection. They ended the unit learning the basics of magnetic particle, eddy-current, dye penetrant, and ultrasonic inspections as well as how to use the coin tap test to inspect composites for delamination.
The seniors continued to practice their soldering skills while performing complex AC circuit calculations and constructing their own basic inductors, transformers and capacitors.
Design, Engineering, & Fabrication
AM DEF students are busy engineering solutions to the "Save The Tape Dispenser" design challenge. Students were given tape dispensers and rolls of tape, but no inserts to allow tape to be dispensed using the dispenser. Using precision measuring tools, such as dial or vernier calipers, students took careful measurements of key parts and fabricated inserts, called mandrels, to assist in tape dispensing. Students often had to iterate their designs to get their part to fit just right. Students will be giving presentations to the class, and some guests, about their design, engineering, and fabrication process.
PM DEF students continue to prepare for the Fusion Certification Exam. We have explored many Fusion functions and tools and are becoming quite proficient with many aspects of the software. In addition to preparing for the exam, students continue to design enclosures for the bluetooth amplifier unit. Most students are currently prototyping in cardboard in order to get a good idea about how their pencil and paper designs will look as 3D assemblies.
Design and Illustration & Digital Media Lab
Digital Media Lab and Design & Illustration Year 1 students went to Burton Snowboards this week. Students received a presentation on the creative process and workflow at Burton, as well as touring the Creative Factory, photo studio, and production warehouse.
DML & DI are excited to share that all of the award winning Scholastic Art from the Brattleboro Museum and Art Center is now hung and on display at Main Street Landing. There will be an opening reception on Tuesday, April 28 at 6 pm.
A special congratulations to Digital Media Lab and Design & Illustration students winning several Vermont Presidential Scholars awards! Levi Olsen (DML) received VT Presidential Scholars in CTE, Honorable Mention and VT Presidential Scholars of the Arts, Honorable Mention; Anna Luther (DI) received VT Presidentatial Scholars in CTE, Honorable Mention; and Payton Hruby (DI) received VT Presidential Scholar of the Arts. Payton is now in consideration for national recognition.
Education Training & Leadership
Two Days, Three Colleges, Endless Inspiration
On March 17, 2026, some students from the Education Training and Leadership (ETL) program set off on a two-day college tour, boarding a charter bus bound for Boston, Massachusetts. Accompanied by Linda Randall and Rebecca Secor, students had the opportunity to explore campus life and academic programs at Merrimack College, Bridgewater State University, and Emmanuel College. Throughout the trip, ETL students connected with current college students and gained valuable insight into their experiences. A highlight of the tour was meeting with Deb Margolis, Academic Dean of Education and School of Social Policy, where students engaged in meaningful conversation about pathways into the field of education. Before heading home, the group took time to experience some of Boston's iconic attractions, including the New England Aquarium and Faneuil Hall. Building connections, inspiration, and memorable moments.
Health Sciences Academy
BTC Health Sciences Academy students are hosting a series of Phlebotomy Student Draw Days this spring, offering the community a chance to support student learning while receiving a supervised blood draw. The featured event takes place Saturday, April 4 from 10:00 AM–2:00 PM at 200 DaVinci Drive in South Burlington, with walk-ins welcome, supervision by a certified phlebotomist, and bagels and pizza provided as a thank you.
Additional weekday draw days will be held at the BTC Downtown Learning Center (29 Church St., Lower Level) throughout April and May. These events are an important part of the Health Sciences Academy curriculum, giving students real-world clinical experience while providing a valuable service to the community.
Homeland Security/Criminal Justice
As we wrap up a productive Q3, our Year 1 students have been working toward their Vermont Emergency First Responder (VEFR) certification. This training is a vital step in preparing them to provide immediate, lifesaving care in their communities. We were honored to host Kevin Adams from Northern Vermont AHEC to lead this training. Kevin brings an incredible wealth of experience to our classroom. Kevin’s immersive teaching style transformed complex medical protocols into practical, hands-on skills. Our students are heading into Q4 with the confidence and technical expertise to handle real-world emergencies.
Introduction to Healthcare
Students in Introduction to Healthcare have started their clinical hours at area healthcare facilities, where they will apply their LNA training while caring for residents and patients. These patient care hours will prepare students to take their Licensed Nursing Assistant Exam in May and give an opportunity to begin their healthcare careers.
We are so proud of students for their practice, skill, and confidence as they use their learning at BTC to help members of the community. Way to go, future healthcare professionals!
Pre-Tech
Pre-Tech students are currently in a photography unit focused on understanding composition, camera settings and basic photo editing using Photoshop and Lightroom.
Important Dates and Events
April 6 - May 8
April 6
- Self-Defense with Deputy Sheriff Dan VanOrnum in HSCJ
April 7
- ETL to VTSU Randolph for SkillsUSA VT State Competitions
- DML Audio Students to Big Lake Recording Company
April 8
- ETL to VTSU Randolph for SkillsUSA VT State Competitions
- IHC Guest Speaker: Analee Pratt LMHC
April 10
- SkillsUSA VT Award Ceremony
- DML & D&I MICA Presentation & Portfolio Review
- SCHOLASTIC ART RECEPTION
April 13
- Self-Defense with Deputy Sheriff Dan VanOrnum
April 14
- DML VT Arts Council Board Meeting Presentation
April 15
- HSA Phlebotomy Draw Day (in class & evening)
- Postsecondary Orientation for A&P class of 2027
April 20-24
- Spring Break, no school
April 28
- DEF to Dynapower for Tour
- Scholastic Art Award
April 29
- HSA Phlebotomy Draw Day (in class)
May 1
- HSA Phlebotomy Draw Day (evening)
May 4
- Dave from United Ag to Guest Speak at Auto Tech
- HS/CJ Ballistics & Explosives Lecture with Matt Diehl, Engineering Fellow, General Dynamics Ordnance and Tactical Systems
May 6
- HSA Hospital Tour
May 8
- New England College Art Faculty Workshops in Design & Illustration
- HSA Phlebotomy Draw Day (in class & evening)